Carpenter MFG CP635 - Types of Nails; Loading Nails

1110
ACCEPTABLE NAILS LOADING NAILS
Carpenter Pin Nailer 5/8''--1-3/8''nails as following pic.
Model No. CP635 contact us 1-888-666-1887
TYPES OF NAILS
OPERATING INSTRUCTIONS
1.Pull the stop lever,open the magainze cover as attached
picture position(Fig.A).
2.Put the pin nails into the groove as the following pic
(Fig.B).
3.Push the pin nails into the blade guide and close the
magazine(Fig.C).
Fig.A
Magazine cover
Stop lever
Fig.B
Nail
Groove
Fig.C
Nail
Blade guide