Carpenter MFG CP635 - Methods of Operation; Adjusting the Nailing Depth

1312
Model No. CP635 contact us 1-888-666-1887
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
ADJUSTING THE NAILING DEPTHMETHODS OF OPERATION
2.
1.
3.
1.Put the nose on the working surface
2.Put the nger on the Double trigger
3.Press the trigger
1.Connect to the air hose.
2.Insert nails into the magazine.
3.Setting the working pressure in the range of 70-100psi.
4.Fire the nail into the working surface.
5.Check the nail depth,if it is to shallow,increase the working pressure, if it is too deep, decrease the
working pressure.
6.Rework Step 4-5, until the nail depth is normal.
too shallow
normal
too deep