Need help?Do you have a question about the Carr Raleigh Amp and is the answer not in the manual?
Adjusts amplifier loudness in clean mode; preamp gain in overdrive mode.
Varies amplifier tone from dark to bright, interactive with Master in overdrive.
Selects between clean and overdrive modes; activates Master control in overdrive.
Adjusts amplifier loudness in overdrive mode; no effect in clean mode.
Protects amp from tube failure; specifies fuse ratings for different voltage models.
Varies bias current applied to the power tube; recommends 30mA for EL84.
Used with a multimeter to measure bias current as voltage.
Designed for 8-ohm loads for maximum power and tone.
Detailed steps for adjusting amplifier bias voltage using a multimeter and bias pot.
Explains bias current calculation and provides advice on selecting replacement tubes.
Recommended settings for Volume, Tone, Mode, and Master with Single Coil pickups.
Recommended settings for Volume, Tone, Mode, and Master with Humbucker pickups.
Covers workmanship for lifetime, materials for three years, and cabinet defects for original owners.
Requires registration, proof of purchase, and avoidance of misuse, abuse, or modifications.
Tubes, speakers, and reverb tanks have a ninety-day warranty under similar terms.
Call for claims, provide serial number, and await Return Merchandise Authorization (RMA#).
International customers should contact their original dealer for warranty and repair.
Provides shipping/mailing addresses, phone, fax, and website for customer support.
To Next Page
General