EasyManua.ls Logo

Carrier TRANSICOLD Supra 560 User Manual

Carrier TRANSICOLD Supra 560
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator’s Manual
62-11
674
Rev B
TM
Supra 560, 660, 760, 860, & 960
Truck Refrigeration Units
Question and Answer IconNeed help?

Do you have a question about the Carrier TRANSICOLD Supra 560 and is the answer not in the manual?

Carrier TRANSICOLD Supra 560 Specifications

General IconGeneral
BrandCarrier TRANSICOLD
ModelSupra 560
CategoryRefrigerator
LanguageEnglish

Summary

Introduction

Unit Identification

Nameplate Details

Details found on the unit's nameplate, including model, serial number, and date.

Safety Precautions

Automatic Start/Stop Warning

Warning about the unit starting automatically and the need for lockout/tagout.

Engine Coolant Safety

Precautions regarding hot and pressurized engine coolant and radiator.

Refrigerant Handling

Information on the hazards of refrigerants and recommending authorized service.

Battery Safety

Safety advice regarding flammable hydrogen gas from lead-acid batteries.

Pre-Trip Inspection

Fuel and Impurity Check

Draining water and impurities from the fuel tank sump and checking fuel level.

Belt Tension Check

Procedure to check and adjust belt tension for proper deflection.

Battery Connection Check

Checking battery connections for cleanliness and tightness, and hold-down security.

Engine Oil Level Check

Procedure for checking the engine oil level using the dipstick.

Battery Cable Inspection

Warning to inspect battery cables for wear, secure clamps, and proper routing.

General Unit Inspection

Visual inspection of the unit for leaks, loose parts, and coil cleanliness.

Truck Body Inspection

Checking truck body door seals, vent seals, and overall condition for damage.

Unit Operation: Road

Starting Unit in Road Mode

Steps to start the unit for road operation, including I/O switch and ROAD key.

Unit Operation: Standby

Starting Unit in Standby Mode

Steps to start the unit for standby operation, including I/O switch and STANDBY key.

Pretrip Check Function

Initiating Pretrip Cycle

How to start the pretrip cycle and what to expect on the display.

Pretrip Test Monitoring

Information that the pretrip test is not self-diagnosing and requires user monitoring.

Changing Setpoint

Adjusting Setpoint Values

How to increase or decrease the setpoint using arrow keys and lock with ENTER.

Setpoint Entry Limitations

Restrictions on changing setpoint during Pretrip or when viewing Unit Data.

Start/Stop Operation Mode

Enabling Start/Stop Mode

How to toggle the unit into Auto-Start/Stop mode.

Start/Stop Operation Criteria

Conditions under which the unit will start or stop in this mode.

Start/Stop Shutdown & Restart Conditions

Criteria for shutting down or restarting the engine in Auto-Start/Stop mode.

Start/Stop Mode Lockout Notes

Notes on when AUTO-START/STOP may be disabled or locked out.

Continuous Run Operation Mode

Enabling Continuous Run Mode

How to toggle the unit into Continuous Run mode.

Continuous Run Purpose

Explanation of why Continuous Run mode is used and its benefits.

Manual Defrost

Initiating Manual Defrost

Steps to start a manual defrost cycle.

Defrost Termination Conditions

Conditions that terminate the defrost cycle, including automatic and manual overrides.

City Speed Mode

Activating City Speed Mode

How to toggle the unit to operate in low speed (city speed mode).

Function Change

Changing Unit Functions

Steps to navigate and change functional parameters using the keypad.

Function Parameter Lockout

Note regarding locked functional parameters when configuration CNF11 is ON.

Unit Data Display

Accessing Unit Data

How to use the UNIT DATA key to scroll through and view data items.

Displaying Data for Longer Periods

How to press ENTER to display data for 30 seconds instead of 5.

Unit Data Codes Explained

Alarm Management

Alarm Buzzer and Display

How the alarm buzzer sounds and how fault light and display indicate alarms.

Resetting Alarms

Procedure to reset alarms using the FUNCTION and ENTER keys.

Alternate Alarm Reset Method

Alternative method to reset alarms by cycling the I/O switch.

Alarm Display Codes

Stopping the Unit

Procedure to Stop Unit

Steps to safely stop the diesel engine and turn off the unit.

Product Loading Guidelines

Pre-Loading Procedures

Recommendations for pre-cooling the body and using defrost before loading.

Loading Procedures and Airflow

Guidelines for ensuring proper airflow during loading and stacking.

Recommended Transport Temperatures

Temperature and Operating Mode Recommendations

Table showing setpoint ranges and recommended operating modes for various products.

General Problems and Solutions

Troubleshooting Common Issues

List of common unit problems and their initial checks/solutions.

Cab Command Fault Display

Explanation of 'Service 1' and 'Service 2' fault displays.

Troubleshooting Fault Displays

Interpreting Fault Codes (AL0-AL15)

Detailed explanations for fault codes AL0 through AL15.

Troubleshooting Fault Displays (Continued)

Interpreting Fault Codes (AL16-AL23)

Detailed explanations for fault codes AL16 through AL23.

Relay Board Components

Fuse and Relay Board Diagram

Diagram showing the location of fuses and relays on the board.

Fuse and Relay Identification

Fuse Identification and Purpose

List of fuses with their corresponding purposes.

Relay Identification and Function

List of relays with their designations and functions.

Unit Maintenance: Engine Oil

Recommended Engine Oil Viscosity

Chart showing recommended SAE weight ratings for engine oil based on climate.

Approved Engine Oil Specifications

Information on API specifications and approved oils for Supra units.

Unit Maintenance Schedule: 1500 Hours

1500 Engine Hour Maintenance Tasks

List of maintenance tasks to be performed every 1500 engine hours.

Engine Speed Specifications

Recommended engine speeds for various Supra models during maintenance checks.

Unit Maintenance Schedule: 12000 Hours

12000 Engine Hour Maintenance Tasks

List of maintenance tasks to be performed every 12000 engine hours.

Coolant Replacement Interval

Guideline for replacing coolant based on hours or years.

Standby Operation Guidelines

Standby Mode Connection Rules

Rules for connecting the unit to a power source in Standby mode.

Standby Power Requirements

Specifications for circuit breakers and extension cables for standby operation.

Electrical Circuit Guidelines

Advice on using separate circuits for multiple units and consulting an electrician.

Emergency Road Service

Contacting Service Centers

Information on finding and contacting the nearest Carrier Transicold service center.

Dealer Locator App

Details about the Carrier Transicold Dealer Locator App features.

24-Hour Action Line

Contact number for urgent service issues when a service center cannot be reached.

Related product manuals