To Next PageTo Next Page
Need help?Do you have a question about the Carrier 30RQS078 and is the answer not in the manual?
General| Model Number | 30RQS078 |
|---|---|
| Category | Heat Pump |
| Refrigerant Type | R-410A |
| Compressor Type | Scroll |
| Operating Voltage Range | 187-253V |
| Phase | 3 |
| Cooling Capacity | 232 kW |
| Heating Capacity | 78000 BTU/h |
| Voltage | 208-230V |
Procedure for verifying unit delivery, checking for damage, and confirming specifications.
Essential safety precautions to be taken before and during unit installation.
Safety guidelines for performing maintenance operations on the unit.
Safety precautions and procedures for carrying out repairs on the unit.
Guidelines and safety precautions for physically moving the unit.
Recommendations for selecting an appropriate and safe location for unit installation.
Final checks and verifications required before initiating the unit's operation.
Defines the operational limits for standard units during cooling mode.
Defines the operational limits for standard units during heating mode.
Guidelines for connecting the unit's power supply.
Guidance on selecting appropriate wire sections for electrical connections.
Instructions for connecting the field control wiring to the unit.
Specifics about the unit's power supply requirements and connections.
Precautions and recommendations for water circuit connections and fluid compatibility.
Measures and procedures for protecting the unit's hydronic circuit from frost.
Flow control for variable-speed pumps based on pressure differential.
Flow control for variable-speed pumps based on temperature difference.
Essential checks to perform before initiating the unit start-up.
Procedures and important notes for the actual unit start-up process.
Details on the hermetic scroll compressors used in the units.
Specifies the type of refrigerant used in the 30RQS/RQSY units.
Instructions for installing and operating the heat reclaim system with desuperheaters.
Frost protection measures for brine options.
Simple, routine maintenance tasks that can be performed weekly.
How to check and adjust the refrigerant volume for optimal operation.
A checklist for verifying the condition and installation of the unit's equipment.
Specific checks and conditions to be met before starting the unit.
