7
LEGEND
* Field supplied.
NEC
—
National Electrical Code (U.S.A.)
TXV
—
Thermostatic Expansion Valve
Piping
NOTES:
1. All piping must follow standard refrigerant piping techniques.
Refer to Carrier System Design Manual for details.
2. All wiring must comply with applicable local and national codes.
3. Wiring and piping shown are general points-of-connection
guides only and are not intended for, or to include, all details for
a specific installation.
4. Filter driers must be bi-flow type suited for heat pump duty.
5. Internal factory-supplied TXVs and check valves not shown.
Fig. 5A — Typical System Piping and Wiring (38AQS With 40RMQ008-016)
To Next Page
Loading...
