Carrier 39E User Manual

Verifies shipment against the shipping order for proper delivery and unit identification.

Proper rigging procedures for moving the RFS unit, emphasizing overhead rigging and not removing skids.

Instructions for suspending the RFS unit using its built-in suspension brackets.

Connecting the RFS unit to ductwork or base unit sections using provided fasteners.

Familiarizing the installer with RFS interior components before wiring and media installation.

Connecting electrical power and control wiring to the RFS unit's junction box.

Procedure for installing the initial roll filter media into the section.

Checkout of the control system designed for full-span media advancement.

Performing operational checks for both manual and automatic units.

Detailed electrical checkout for automatic roll filter sections by a qualified electrician.

Step-by-step guide for replacing and rethreading the filter media.

Adjusting the media runout switch for proper media depletion detection.

Adjusting the pressure switch setting for detecting media dirt load.

Details on motor gear-drive assembly, including lubrication and chain tension.

Information on the media tension brake assembly and its function.

Explanation of the shear pin's role in preventing motor gear-drive damage.

General cleaning recommendations and lubrication for unit components.