4
STANDARD FEATURES AND ACCESSORIES
Ease of Installation
Mounting Bracket S
Low Voltage Controls S
Comfort Features
Microprocessor Control S
Wired Remote Control for High W alls, Cassette and Floor Console A
Wired Remote Control f or Ducted S
Wireless Remote Control S
Rapid Cooling and Heating S
Automatic Air Sweep S
Cold Blow Prevention S
Continuous Fan S
Auto Restart Function S
Auto Changeover S
Follow Me S
Energy Saving Features
Inverter Driven Compressor S
Sleep Mode S
24 Hou r Stop/Start Timer S
46° F Heating Mode (Heating Setback) S
Safety And Reliability
Indoor Coil Freeze Protection S
3MinuteTimeDelayForCompressor S
High Compressor Discharge Temperature S
Low Voltage Protection S
Compressor Overload Protection S
Compressor Over Current Protection S
IPM Module Protection S
Ease of Service
Cleanable Filters S
Diagnostic S
Error Messages Displayed On Front Panel S
Application Flexibility
Condensate Pumps For High Walls and Floor Console A
Condensate Pump For Cassette and Ducted S
Crankcase Heater S
Basepan Heater S
Legend
S Standard
A Accessory
INDOOR UNITS
Fig. 1 – Condensate Pump Accessory
On high wall fan coils, the condensate pump has a lift capability of
12 ft. (3.6 m) on the discharge side with the pump mounted in the
fan coil or 6 ft (1.8 m) on the suction side if the pump is remote
mounted. The pump is recommended when adequate drain line
pitch cannot be provided, or when the condensate must move up to
exit.
OUTDOOR UNITS
Crankcase Heater
Standard on all unit sizes. Heater clamps around compressor oil
stump.
To Next Page
Loading...
Need help?
General
