INFRARED RECEIVER
5. Placement
o Press the xing clips with a screwdriver.
o Separate the panel from the base.
o Mark the fastening points using the base as a template.
o Drill a hole in the wall.
o Drill a hole in the wall to accommodate the device.
o Anchor the base with appropriate screws and bolts.
1 Installation hole
2 Fixing hole
3 Ceiling
4 Wall
5 Infrared receiver
6 Wiring cable
7 Fixing clips
2
OK
OK
NO
NO
43+1mm
60+1mm
67+1mm
1,50 m
COMP OPERTIMER
COMP OPERTIMER
To Next Page
Loading...
