Need help?Do you have a question about the Carrier XCT 7 and is the answer not in the manual?
Lists the infrared receiver, belt, and screw included in the kit.
Details wall mounting, height, and placement considerations for optimal temperature measurement.
Describes steps for attaching the receiver base to the wall using fixing clips and screws.
Details connecting the infrared receiver to the indoor unit PCB using the provided wire.
Explains how indoor and outdoor unit faults are indicated by flashing lights OPER and TIMER.
Describes the function of the COMP, TIMER, and OPER indicator lights.
Explains the auxiliary switch operation and the infrared receiver's signal reception.
To Next Page
General