Why is my Carrier 42QHB18D8S Air Conditioner not cool/warm enough?
If your Carrier Air Conditioner is not cooling or warming enough, ensure the temperature and mode settings are correct. Check if the air filters are clean and that all windows and doors are closed. Also, make sure that the airflow is unrestricted in and out of both the indoor and outdoor units, and that the fan speed is set to high with louvers allowing maximum flow.
What to do if my Carrier 42QHB18D8S unit will not operate?
If your Carrier Air Conditioner unit will not operate, check the following: Is there a power failure? Has a switch been turned off, a circuit breaker tripped, or a fuse blown? Are the batteries in the remote control fresh? Are the clock and timer on the remote set correctly?
How to fix erratic operation of Carrier 42QHB18D8S?
If your Carrier Air Conditioner is operating erratically, unpredictably, or is unresponsive, it could be due to interference from cell phone towers or remote boosters. Try disconnecting the power and then reconnecting it. You can also press the ON/OFF button on the remote controller to restart operation.
General| Series | 42QHB18D8S Series |
|---|---|
| Refrigerant | R410A |
| Indoor Unit Type | Wall Mounted |
| Voltage | 220-240 V |
| Heating Capacity | 18000 BTU/h |
| Heating Seasonal Performance Factor (HSPF) | 9.0 |
| Power Supply | 220-240V |
| Cooling Capacity | 18000 BTU/h |
To Next Page
