Carrier 50SZ024 - Page 5

base_ [[[ .......
/ Screw _ @
/ (NOTE A) _§
/
/ slur, :';allg_ "_ _ WOOdnailer*_Fla
I u0p, ____.__41K ilFdbRooz urb.
[ It:i:::tl _J¢Insulation(field
Roofing m_, II supphed)
/ field supplied II.
\ II vs!:!tl II_ Ductwork
\ __Jtl H field supplied]
Roof Curb for Small Cabinet
Note A: When unit mounting screw is used,
retainer bracket must also be used.
Roof Curb for Large Cabinet
Note A: When unit mounting screw is used,
retainer bracket must also be used.
Retlm opening
(BXC)
deck paq
Sho_
Suppod
Long
Suppod
E D
R/A
Insulated
deck pan
_Gasket around_
duct
Gasket around
outer edge \
'N\\
\/
S/A
/\
UNIT SIZE
50SZ024-030
50SZ036-060
NOTES:
ODS CATALOG A B
NUMBER IN. (aM) IN. (aM)
CPRFCURB006A00 8 (203) 11 (279)
CPRFCURB007A00 14 (356) 11 (279)
CPRFCURB008A00 8 (203) 16-3/16 (411)
CPRFCURB009A00 14 (356) 16-3/16 (411)
1. Roof curb must be set lip for unit being installed.
C
IN. (MM)
16-1/2 (419)
16-1/2 (419)
17-3/8 (441)
17-3/8 (441)
D
IN. (MM)
28-3/4 (730)
28-3/4 (730)
40-1/4 (1022)
40-1/4 (1022)
E
IN. (MM)
30-3/8 (771)
30-3/8 (771)
41-15/16 (1065)
41-15/16 (1065)
F
IN. (MM)
44-5/16 (1126)
44-5/16 (1126)
44-7/16 (1129)
44-7/16 (1129)
A05308
G
IN.(MM)
45-15/16 (1167)
45-15/16 (1167)
46 - 1/16 (1169)
46-1/16 (1169)
2. Seal strip nlust be applied, as required, to unit being installed.
3. Dimensions are in inches.
4. Dimension in ( ) are in millimeters.
5. Roof curb is made of 16 gauge steel.
6. Attach ductwork to curb (flmlges of duct rest on curb).
7. Insulated pmlels: I in. thick fiberglass 1 lb. density.
8. When unit mounting screw is used (see Note A), a retainer bracket must be used as well. This bracket must also be used when required by code for hurricane or seismic
conditions. This bracket is available throt_gh Mierometl.
Fig. 4 - Roof Curb Dimensions