Need help?Do you have a question about the Carrier 50QEH and is the answer not in the manual?
Inspect unit, check site requirements, and prepare for installation.
Guidelines for connecting supply and return air ductwork.
Instructions for connecting water supply and return lines.
Wiring instructions, voltage checks, and component connections.
Requirements for water flow rates and entering water temperatures.
Details on PTC devices, overloads, and compressor protection mechanisms.
Explains HPCO, FPS, OFS, LPS/RTS, HWTS/LWTS, and lockout circuits.
Procedures for charging refrigerant using charging charts.
Instructions for compressor removal, lubrication, and blower assembly service.
Guides for cleaning coils, pans, filters, heat exchangers, and fan discharge conversion.
Guide for replacing strainers within the AccuRater device.
Diagnoses and solutions for power problems and unit short cycling.
Troubleshooting for blower-only, compressor-only, and safety light indicators.
Addresses problems with cooling/heating, noisy operation, and airflow.
To Next Page
General
