Carrier 51AKP - Sleep Mode Operation; Timer Programming (Switching On)

GB - 7
ENGLISH
CONTROL
PANEL
• Switch on the unit by pressing button 1.
• Using the function selector, button 2, select the preferred mode.
• When the unit is running, press sleep button 6. The Sleep
mode 12 icon illuminates on the display. Repress it to stop the
function.
• The unit increases the cooling temperature 1°C every hour.
After 2 hours it keep the set point.
• Sleep function doesn’t work in Auto mode.
M
ON/OFF
MODE
FAN
TEMP
TIMER
SLEEP
FAN DRY COOL AUTO SLEEP
ON
OFF
SET TIME
LOW MID HIGH
SET TEMP
1 2 12 6
Sleep Mode
FAN
SLEEP
T-ON
CLOCK
CANCEL
TIME - TIME +
TEMP- TEMP+
MODEON/OFF
C
ON
OFF
AM
PM
AUTOF AN
AUTO
OPER
A
E
B
P
• Switch on the unit by pressing button A .
• Using the function selector, button B, select the preferred mode.
• When the unit is running, press sleep button E. The Sleep mode
P icon illuminates on the display. Repress it to stop the function.
• The unit increases the cooling temperature 1°C every hour. After
2 hours it keep the set point.
• Sleep function doesn’t work in Auto mode.
M
ON/OFF
MODE
FAN
TEMP
TIMER
SLEEP
FAN DRY COOL AUTO SLEEP
ON
OFF
SET TIME
LOW MID HIGH
SET TEMP
5
FAN
SLEEP
T-ON
CLOCK
CANCEL
TIME - TIME +
TEMP- TEMP+
MODEON/OFF
C
ON
OFF
AM
PM
AUTOF AN
AUTO
OPER
G
H
B
Q
13
H
Timer programming when switching on:
• Press the timer selection button 5 to set in how many hours
the unit will start. Timer setting range is between 0,5-24 h.
Time will appear on display 13.
• When starting the unit works in the previous mode
Timer programming when switching on:
• Switch on the unit by pressing button A .
• Using the function selector, button B, select the preferred mode
• When the unit is running, press the timer-on button G.
Press buttons H to set in how many hours the unit will start.
Timer setting range is between 0,5-18 h. Time will appear on
display Q.
• When starting the unit works in the previous mode
A
CONTROL
PANEL
Timer programming