Carrier AquaEdge 23XRV - Page 34

34
Fig. 36 — Motor Terminal Insulation (Q and R Compressors)
Fig. 37 — Motor Terminal Insulation (P Compressor)
CENTER TERMINAL ENCLOSURE
FRAME OVER TERMINAL BOX
FRAME ASSEMBLY
MOTOR POWER CABLES
(MAY BE 1 OR 2 PER
TERMINAL)
0.38 in. (9.7 mm)
APPROX.
FOAM
INSULATION
WIRE
TIES
VIEW LOOKING DOWN
INTERNAL/EXTERNAL TOOTH
LOCK WASHER
BETWEEN TERMINAL
BOX FRAME AND
PE/GROUND CABLE LUG
MOTOR
TERMINAL
STUD NUTS
WASHER
TERMINAL
ENCLOSURE
FRAME
TERMINAL
BOX
FRAME
T2
T3
SECTION C-C
FROM FIG. 34
a23-1577
a23-1577
SECTION D-D
LOCK WASHER
FOAM
INSULATOR
WIRE
TIES
MOTOR TERMINAL
STUD NUTS
(PE/GND)