Need help?Do you have a question about the Carrier AquaSnap 30RB 372 and is the answer not in the manual?
General| Cooling Capacity | 372 kW |
|---|---|
| Refrigerant | R-134a |
| Compressor Type | Scroll |
| Power Supply | 400V / 3Ph / 50Hz |
| Number of Circuits | 2 |
Verify unit integrity, completeness, and nameplate data against order.
Critical safety procedures during installation, including handling and protection devices.
Safety protocols for personnel performing maintenance on electrical/refrigerant systems.
Safety measures for repairs, including refrigerant handling and component replacement.
Guidelines for safely moving the unit, including lifting and support removal.
Recommendations for selecting an appropriate installation location and site preparation.
Comprehensive checks required before system start-up for proper operation.
Key physical specifications for standard 30RB 162-262 “B” units.
Electrical specifications for standard units and units with options.
Information on short-circuit stability current for TN and IT systems.
Defines the operational limits for evaporator and condenser based on temperatures.
Specifications for the unit's power supply, including voltage and phase requirements.
Calculation and acceptable limits for voltage phase imbalance.
Details on power connection points and disconnect switch options.
Essential precautions for water circuit connections and fluid compatibility.
Methods and options for protecting the unit's water circuits from freezing.
Step-by-step guide for adjusting and controlling system water flow rate.
Simple maintenance tasks performable by the unit user.
Maintenance requiring specific technical skills, often by specialists.
Advanced maintenance operations reserved for manufacturer-authorized personnel.
To Next Page