Need help?Do you have a question about the Carrier AquaSnap 30RB 602 and is the answer not in the manual?
Follow regulations, use proper tools, handle refrigerant safely, use approved parts.
Check for damage, follow lifting instructions, and ensure proper positioning.
Authorised personnel, protective equipment, electrical safety, refrigerant handling.
Verify installation drawings, diagrams, documents, and safety routes.
Install in accessible, safe location, check site loading and levelness.
Provides nominal power, current, voltage, and power input data for various models.
Provides nominal current, maximum current, LRA, and cosine phi for compressors.
Details short-circuit stability current values for different unit configurations and fuse types.
Specifies evaporator and condenser operating limits for different unit models and options.
Provides minimum chilled water flow rates for units without hydronic modules.
Graphs showing pressure drop versus water flow rate for evaporators and piping.
Provides maximum chilled water flow rates for units without hydronic modules.
Provides minimum and maximum evaporator flow rates for different unit models.
Specifies power supply requirements based on the chiller nameplate and electrical data.
Explains how to calculate and check voltage phase imbalance.
Details options for power connection and disconnect switches.
Refers to wiring diagrams for field control wiring features.
Provides guidance on wire sizing for electrical connections based on unit size.
Covers precautions for water supply analysis, filtering, treatment, and system components.
Step-by-step guide for adjusting the control valve to achieve the nominal system flow rate.
Describes the high-pressure safety switches with automatic reset.
Explains evaporator frost protection based on antifreeze concentration.
Lists torque values for main electrical connections.
Steps for starting the chiller after all checks are complete.
Guides checking evaporator pressure drop and plotting it on a curve.
Instructions for checking and recording voltage imbalance.
Details checks for water loop volume, inhibitor, freeze protection, and piping.
To Next Page
General