To Next PageTo Next Page
Need help?Do you have a question about the Carrier Aquasnap 30RB 090R and is the answer not in the manual?
General| Model | 30RB 090R |
|---|---|
| Category | Chiller |
| Cooling Capacity | 90 kW |
| Compressor Type | Scroll |
| Refrigerant | R-410A |
| Power Supply | 400V/3Ph/50Hz |
| Sound Level | 68 dB(A) |
| Dimensions (L x W x H) | 2280 x 1100 x 2170 mm |
| Weight | 1980 kg |
Instructions for outdoor installation, site requirements, and clearance considerations.
Electrical data like voltage, current draw, power input, and start-up current.
Requirements for the unit's power supply, including voltage and phase balance.
Guidelines for selecting appropriate cable sizes based on installation conditions.
Defines the operational limits for water and air temperatures for various unit configurations.
Specifies minimum flow rates for heat transfer fluid to ensure efficient exchange.
Defines maximum flow rates for heat transfer fluid to avoid exceeding pressure drop limits.
Essential checks and recommendations for connecting hydraulic circuits and ensuring proper fluid compatibility.
Control method for variable speed pumps maintaining constant pressure differential.
Control method for variable speed pumps maintaining desired temperature difference.
Comprehensive checklist of visual and documentation checks required before initial unit startup.
Steps and precautions for the unit commissioning process, supervised by qualified personnel.
Key checks for compressors, hydraulics, and refrigerant charge before operation.
Maintenance requiring specific expertise, covering electrical, hydraulic, and mechanical systems.
Advanced maintenance requiring manufacturer-certified personnel for major component replacements.
Safety precautions and guidelines for working with the unit's variable frequency drives.
Checklist for shipping damage, unit level, power supply, wiring, grounding, and protection.
Checks for pump cabling, oil level, leaks, voltage imbalance, and power supply range.
Verification of water loop volume, corrosion inhibitor, frost protection, piping, and screen filter.
Procedure to measure and plot evaporator pressure drop to determine flow rate.
