Need help?Do you have a question about the Carrier AQUASNAP 30RB series and is the answer not in the manual?
Details safety measures for unit installation, including handling and protection devices.
Outlines safety requirements for personnel performing maintenance and handling refrigerants.
Covers safety precautions for repairs, fault handling, and use of authorized personnel.
Lists essential checks before starting the refrigeration system, including documentation.
Provides dimensional drawings and essential clearances for standard 30RB 162-262 "B" units.
Presents dimensional drawings and clearances for 30RB 162-262 "B" units with option 280.
Shows dimensional drawings and clearances for 30RB 302-522 units.
Details dimensional drawings and clearances for 30RB 602-802 units.
Lists physical data for standard 30RB 162-262 "B" units, including weights and component specs.
Defines the operating limits for the evaporator and condenser under various conditions.
Presents curves showing pressure drop versus water flow rate for evaporators.
Specifies requirements for power supply, voltage range, and potential warranty invalidation.
Details frost protection measures for the hydronic circuit and evaporator.
Step-by-step guide to adjusting water flow using control valves and checking pressure drops.
Displays pump performance curves for single and double low-pressure pumps.
Shows static system pressure curves for different 30RB units and pump configurations.
Describes compressors, their features, safety devices, and lubrication requirements.
Describes the brine option for low temperatures and associated frost protection.
Recommends regular inspection and cleaning of condenser coils.
A checklist for preliminary information, equipment checks, and air handling systems before start-up.
Details checks for voltage imbalance, evaporator water loop, and pressure drop.
To Next Page
General