9
A
For the heat reclaim condenser option, please refer to the relevant chapter.
With hydronic module
Without hydronic module
NOTE: Non-contractual drawings.
When designing an installation, refer to the
certified dimensional drawings, available on
request.
For the positioning of the fixing points, weight
distribution points and centre of gravity
coordinates please refer to the dimensional
drawings.
Power connection
Clearances required for maintenance and air ow
Clearances recommended for evaporator tube removal
Clearances recommended for heat exchanger removal
Water inlet
Water outlet
Air outlet, do not obstruct
Control box
with valve without valve
To Next Page
Loading...
