10
With hydronic module
Without hydronic module
Power connection
For user control
connection
NOTE: Non-contractual drawings.
When designing an installation, refer to the
certified dimensional drawings, available on
request.
For the positioning of the fixing points, weight
distribution points and centre of gravity
coordinates please refer to the dimensional
drawings.
Clearances required for maintenance and air ow
Clearances recommended for evaporator tube removal
Clearances recommended for heat exchanger removal
Water inlet
Water outlet
Air outlet, do not obstruct
Control box
1500
1500
1500
2200
2253
2297
1500
500
1500
1500
500
1500
2253
2410
2457
2200
A
with valve without valve
To Next Page
Loading...
