To Next PageTo Next Page
Need help?Do you have a question about the Carrier Aquasnap 30RB 055R and is the answer not in the manual?
General| Model | 30RB 055R |
|---|---|
| Category | Chiller |
| Cooling Capacity | 55 kW |
| Refrigerant | R-410A |
| Power Supply | 400V / 3Ph / 50Hz |
| Compressor Type | Scroll |
| Operating Range | -10°C to 45°C |
Procedures for checking received equipment and comparing it with the order, including nameplate verification.
Guidelines for safely moving and lifting the unit, emphasizing proper techniques and safety precautions.
Requirements for outdoor installation, ensuring proper clearance, level surface, and protection from environmental factors.
Lists physical characteristics like sound levels, dimensions, weight, and compressor/refrigerant data for the unit series.
Provides detailed electrical data, including voltage, current draw, and power factor for various unit models.
Specifies power supply requirements, including voltage range, and explains phase imbalance calculation and limits.
Defines the permissible operating temperature ranges for water and air, including specific conditions for different unit configurations.
Provides essential precautions and recommendations for connecting hydraulic circuits, including water analysis and treatment.
Details hydraulic circuit schematics and key components for units with and without hydraulic modules.
Details operations for hydraulic modules with fixed-speed and variable-speed pumps, including cleaning and control procedures.
Presents graphs detailing available static pressure for high and low-pressure pumps against water flow rate.
Lists essential pre-start-up checks for the complete system, including installation, refrigerant, and electrical connections.
Provides instructions for unit commissioning, emphasizing supervision by a qualified engineer and system testing.
Highlights critical checks for compressors, hydraulics, and refrigerant charge to ensure correct operation.
Checklist items for unit start-up, including pump connection, leaks, voltage, and evaporator water loop verification.
