Carrier AquaEdge 23XRV - Page 8

8
Fig. 6 — Typical 23XRV Installation — Sensor Locations (Units with P Compressor)
1
9
8
7
2
3
4
5
6
1 — Compressor Motor Winding Temperature (Hidden)
2 — Vaporizer Temperature
3 — Evaporator Return Liquid Temperature (Hidden)
4 —Oil Sump Pressure
5 — Oil Sump Temperature
6 — Supply Oil Pressure
7 — Condenser Liquid Temperature (Hidden)
8 — Evaporator Liquid Flow (Optional)
9 — Evaporator Liquid Temperature (Hidden)
10 — Compressor Discharge Temperature
11 — Compressor Discharge Pressure
12 — Compressor Discharge High Pressure Switch
10
11
12
13 — Inductor Temperature Switch (Inside VFD Enclosure)
14 — VFD Rectifier Temperature (Inside Power Module)
15 — VFD Heat Sink Temperature (Inside VFD Enclosure)
16 — VFD Inverter Temperature (Inside Power Module)
17 — Evaporator Temperature
18 — Condenser Pressure
19 — Condenser Liquid Level Sensor
20 — Economizer Pressure (Optional)
21 — Economizer Temperature (Optional)
13
14
15
16
19
17
18
20
21