Carrier DATACOLD 500 T/R - User Manual

INSTALLATION AND
USER’S MANUAL
External and internal
temperature recorders
DataCOLD 500 T/R
Carrier Transicold Europe – 10, Bd de l’Oise – 95031 Cergy Pontoise Cédex – France
Carrier Transicold North America, 700 Olympic Drive, Athens, Ga. 30601 - U.S.A.
Carrier Refrigeration Operation 2003 Printed in France 02-03 / 62-61138-20

Carrier DATACOLD 500 T/R Specifications

General

Brand	Carrier
Model	DATACOLD 500 T/R
Category	Weather Radio
Language	English

Summary

General Description of Components

Installation Procedures

Temperature Sensor Placement

Guides the placement of temperature sensors for accurate compartment readings.

R-Version Mounting Instructions

T-Version Mounting Instructions

Connector Pinout Details

Details the connections for power, digital inputs, and temperature sensors.

Wiring and Initial Configuration

Covers connecting components and initial setup procedures.

Post-Installation Testing

User Menu Operations

Alarm Menu Setup

Parameter Menu Configuration

Temperature Input Configuration

Configuring sensor inputs, names, and activation.

Digital Input Setup

Setting up digital inputs for status monitoring.

Compartment Configuration

Alarm Settings Setup

Defining alarm groups, limits, and delay times.

Printer Settings Setup

General Settings Setup

Setting units, sample rate, vehicle ID, and PIN.

Communication Port Setup

Technical Data

Technical Specifications Summary

Details operating voltage, power consumption, temperature range, memory, inputs, and outputs.

Enclosure D: Failure Codes & Correction Factor Procedure

Correction Factor Adjustment Procedure

Step-by-step guide for adjusting the sensor offset using a precision resistor.

Enclosure E: Wiring Diagrams

Wiring: Connector 1 (Power & Outputs)

Wiring: Connector 3 (Digital Inputs)

Wiring: Connector 4 (Temperature Inputs)

Wiring: Connector 2 (RS232)