Cartrend 513214 User Manual

55 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

120W Smart Spannungswandler

Table of Contents

Questions and Answers:

P
pmillerAug 3, 2025
Why is the red light on my Cartrend Inverter?
- C
  Craig LawrenceAug 3, 2025
  The red light indicates a problem. It could be due to several reasons: * The temperature is higher than 68°C, triggering thermal overload protection. To resolve this, immediately switch off the power inverter. Check for sufficient ventilation and ensure the cooling fan vents are not blocked. * The input voltage is too high, activating over-voltage protection. Immediately switch off the power inverter and check the input voltage. * If none of the above, allow the device to cool down and ensure it has sufficient ventilation. Wait 10 minutes before switching the power inverter on again.
K
Kim PottsAug 18, 2025
What to do if no LED is lit on my Cartrend 513214 Inverter?
- A
  alexis30Aug 18, 2025
  If no LED is lit on your Cartrend Inverter, it could be due to the following reasons: 1. The plug is not correctly connected to the power supply. Check the connections. 2. There is no input voltage because the cigarette lighter has no power supply. Turn on the ignition. 3. The fuse is faulty. Replace the fuse.

Cartrend 513214 Specifications

General

Brand	Cartrend
Model	513214
Category	Inverter
Language	English

Summary

Safety Instructions

Package Contents

Intended Use

Technical Features

Over-voltage and Under-voltage Protection

Explains the inverter's protection mechanisms against input voltage fluctuations, including LED indicators.

Circuit Protection and Overheating

Covers short circuit, overload, and overheating protections with associated warning codes and indicators.

Warning and Protection Indicators

Details the meaning of LED indicators and buzzer alerts for various fault conditions and protections.

Technology

Output Voltage and Waveform

Describes the modified sine wave output and its compatibility with modern appliances.

Operation

Installation and Connection

Guides on how to connect the power inverter to a 12V socket and initial setup.

LED Indicators and Restart

Explains the meaning of the green and red LEDs and the procedure for restarting the device.

Usage and Output Sockets

Details how to use the 230V AC socket and USB port, including power limits.

Cleaning, Care, and Maintenance

Replacing the Fuse

Step-by-step instructions for safely replacing the fuse in the 12V plug.

Troubleshooting

Warranty

Disposal

Technical Data

Declaration of Conformity