LHR Technologies, Inc. CarveWright™ System (Rev 1.39) 03/02/09 5
Specifications
Package Size……………………………………… ….28.5” Long x 20.25” Wide x 18” Deep
Package Weight………………………………………………………..………..78 lbs (35.4 kg)
Machine Weight………………………………………………………..………...70 lbs (31.8 kg)
Cut Motor Speed (No Load)………………………………………………………..20,000 rpm
Cut Motor Horsepower (Peak)……………………………………………………………1.0Hp
Electrical Rating…………………………………………………………110VAC at 8 A, 60 HZ
Power Cord Length………………………………………………………………………...6 feet
Maximum Cut Depth………………………………………….….1” (or length of cutting flutes)
Movement Velocity:
Length Axis……………………………………………………..…2 inches per second
Width Axis………………………………………………….…….12 inches per second
Up/down Axis…………………………………………………....12 inches per second
Workpiece Size (Min):
Length………………………………………………………………………….7.0 inches
Width…………………………………………………………………………...1.5 inches
Height……………………………………………………………………..…...0.5 inches
Workpiece Size (Max):
Length………………...………………………………144 inches (Limited by weight)
Width……………………………………………………………………….…14.5 inches
Height…………………………………………………………………..……...5.0 inches
To Next Page
Loading...