Need help?Do you have a question about the CARVIN M600 and is the answer not in the manual?
Details D3F and 1/4" phone jacks for balanced/unbalanced and high-impedance sources.
Explains the input attenuator for managing signal levels and preventing distortion.
Describes the LED that signals input preamplifier overload at >100 mv RMS.
Details D3F and 1/4" phone jacks for balanced/unbalanced and high-impedance sources.
Explains the input attenuator for managing signal levels and preventing distortion.
Describes the LED that signals input preamplifier overload at >100 mv RMS.
General| Channels | 6 |
|---|---|
| Phantom Power | Yes |
| Send/Return | Yes |
| EQ | 3-band |
| Dimensions | 3.5 inches |
To Next Page
