Casablanca W-500 User Manual

FILE NAME ( W500WallControl.pmb) ras 07-09-04
Casablanca Fan Co. - Factory Service Department - Technical Library
1
W-500™ Control includes all of the standard features, in a new design that is
compatible with a number of Casablanca fan Models . The W-500™ hand-held
remote provides three forward or reverse fan speeds, full spectrum light dimming
and has an optional wall bracket. The W-500™ may be used alone to control
several fans or with extra controls to operate a single fan from different locations.
W-500
(Transmitter)
SCREW
6-32 X 1”(2)
WOOD SCREW
1” (2)
DRYWALL
ANCHOR
6-32 (2)
12V BATTERY
W-500™ INSTALLATION
W-500™ CONTROL BRACKET INSTALLATION
Standard Light Switch
Step A. Remove the two screws holding the switch cover
plate. Do not remove the cover plate.
Step B. Orient the control bracket as shown and line up
the two inner mounting holes with those on the switch.
Step C. Install and tighten screws by hand only.
CAUTION! Do not use with wall dimmer or rocker switch.
W-500
CONTROL
(TRANSMITTER)
W-500
CONTROL
HOLDER
SCREW
6-32 X
3
/8” (2)
Wall Controls - CONTINUED
Rocker
Switch
Standard Switch
NOTE: - If a ROCKER SWITCH is being use to con-
trol the fan location, it must be changed to a STAN-
DARD SWITCH as shown.
W-500
™

Casablanca W-500 Specifications

General

Brand	Casablanca
Model	W-500
Category	Network Router
Language	English

Summary

W-500TM Control Installation

W-500TM Transmitter and Holder Installation

Instructions for installing the W-500 remote transmitter and its holder.

W-500TM Control Bracket Installation

Steps for mounting the W-500 control bracket to a wall.

W-500TM Battery Installation

Guide for removing the battery door and inserting the 12V battery.

W-500TM Operation

Control Storage

How to place the W-500 control onto its wall holder for storage.

Fan Control Functions

How to start, stop, and select fan speeds using the control.

Airflow Direction and Light Control

Instructions for reversing airflow and dimming the light.

W-500TM Troubleshooting and Settings

Fan Not Working Troubleshooting

Initial steps to diagnose and resolve fan non-operation issues.

Transmitter and Receiver Settings

Guide to matching transmitter and receiver jumper switch settings.

W-500TM Advanced Configuration and Troubleshooting

Changing Frequency Setting

Steps to modify jumper switch settings to change the operating frequency.

Common Operational Problems

Solutions for fan starting, wobbling, noise, speed, and battery life problems.