Casadio Enea - Positioning the Hopper; Caution and Safety Precautions

A
2
English
7 EN
5. Positioning the hopper
After removing the packing materials, place the receptacle
(2) on the grinder and fasten it using the ring nut (A).
The grinder only works when the ring nut (A)
has been completely tightened.
7KLVFKDSWHULQWKHPDQXDOLVWREHXVHGE\TXDOL¿HGDXWKRUL]HGWHFKQLFDOVWDII
6. Caution
GENERAL
The manufacturer disclaims all liability for
damages to items or persons due to improper
use or due to the appliance being used for
purposes other than its intended use.
Do not operate the appliance with wet hands or
bare feet.
Ensure that the appliance is not used by children
or persons who have not been instructed in its
correct use.
THERMAL PROTECTOR
The thermal protector cuts in if the motor gets
overheated due to malfunction.
Allow the appliance to cool down before switching
it on again.
If the problem is repeated, call the authorized
servicing department.
COFFEE STORAGE
Always use fresh coffee beans and store in jars
or waterproof, sealed bags. Keep away from light
sources and store in a cool, dry place.
Try to use up all the coffee in the doser at the
end of the working day since it can lose its aroma
and spoil.
MACHINE CLOSE-DOWN
When the machine is left unattended
for a prolonged period (for example
out of hours), carry out the following steps:
• Remove the plug or turn off the main
switch;
• Empty the coffee beans receptacle and
the ground coffee doser;
• Clean as indicated in the dedicated
chapter.
Non-compliance with these safety measures
exonerates the manufacturer from all liability
for malfunctions, damage to property and/
or injury to persons.