Need help?Do you have a question about the Casals VNTR250M and is the answer not in the manual?
Instructions for connecting the machine to the mains power supply.
Guidelines on how to set up and use the machine in the workplace.
Describes the internal spring mechanism for raising the motor unit.
How to adjust the depth of the blade penetration for cutting.
Steps to adjust the turntable to the zero-degree position.
How to ensure the saw blade is perpendicular to the working plane.
Adjusting the limit stops for vertical plane angles (0° to 45°).
Step-by-step guide on how to operate the mitre saw.
Instructions on how to safely start and stop the saw blade.
How to use the mitre saw in its table saw configuration.
How to use the stop guide when operating with the upper bench.
Explains the function and safe use of the tracking device.
Information on included accessories like the uptake nozzle.
How to properly use the clamp to secure the workpiece.
Prohibited uses and important warnings about misusing the tool.
Guidance on lubricating moving parts and controls.
Instructions for routine cleaning of the machine.
Step-by-step instructions for safely replacing the saw blade.
Information on when and how to replace the machine's brushes.
To Next Page
General