EasyManua.ls Logo

Case IH FARMALL 50B User Manual

Case IH FARMALL 50B
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Part number 48144025
1
st
edition English
June 2017
SERVICE MANUAL
FARMALL
®
35A
FARMALL
®
40A
Tier 4B (final)
Compact Tractor
FARMALL
®
35A ROPS: PIN LSMF35ARxx0010001 to LSMF35ARVH0010035
FARMALL
®
40A ROPS: PIN LSMF40ARxx0010001 to LSMF40ARCH0010034
Printedin U.S.A.
© 2017 CNH Industrial America LLC. All Rights Reserved.
Case IH is a trademark registered in the United States and many
other countries, owned or licensed to CNH Industrial N.V.,
its subsidiaries or affiliates.
Question and Answer IconNeed help?

Do you have a question about the Case IH FARMALL 50B and is the answer not in the manual?

Case IH FARMALL 50B Specifications

General IconGeneral
BrandCase IH
ModelFARMALL 50B
CategoryTractor
LanguageEnglish

Summary

INTRODUCTION

Safety rules

General safety rules, personal safety, machine safety, and warnings for operating the tractor.

Personal Protective Equipment (PPE)

Guidelines on wearing appropriate personal protective equipment for safety.

Utility safety

Safety precautions related to buried cables, overhead power lines, and electrical contact.

Electrical storm safety

Safety procedures to follow during electrical storms while operating or near the tractor.

Lifting and overhead loads

Safety precautions for lifting operations and overhead loads.

Torque - Minimum tightening torques for normal assembly

Torque - Standard torque data for hydraulic connections

Torque values for metric O-Ring Boss (ORB) port connections

Torque specifications for metric O-Ring Boss port connections.

Torque values for Inch O-Ring Boss (ORB) port non-adjustable connections

Torque specifications for inch O-Ring Boss non-adjustable port connections.

Torque values for 37° flare connections - Joint Industry Council (JIC)

Torque specifications for JIC 37° flare hydraulic connections.

Basic instructions - Shop and assembly

Protecting the electronic and/or electrical systems during charging and welding

Precautions to protect electronic systems during charging and welding operations.

General specification - Biodiesel usage

Biodiesel fuel usage conditions

Critical conditions and precautions for using biodiesel fuel in tractors.

General specification

Engine

Technical specifications for the tractor's engine.

Related product manuals