SAFETY/DECALS/HAND SIGNALS
14
OPERATOR PRECAUTIONS
Personnel
• If your machine is equipped with pilot controls you must always know which
contol pattern is engaged before actuating the hydraulics.
• Be prepared for emergencies. Always have a first aid kit and a working fire
extinguisher with you and know how to use each.
• Avoid loose fitting clothing, loose or uncovered long hair, jewelry and loose
personal articles.
• Know and use the protective equipment that is to be worn when operating this
machine. Hard hats, protective glasses, protective shoes, gloves, reflector type
vests, respirators and ear protection are examples of typed of equipment that
may be required.
• Certain protective equipment should be replaced and renewed upon age and
wear. Old hard hats may not afford the original users intention. Faded and
soiled vest are no longer as highly visible as original intent. See the
manufacture’s recommendation.
• Do not rush. Walk, do not run.
• Know and use the hand signals required for particular jobs and know who has
the responsibility for signaling.
General
• It is the responsibility of the operator to read and understand the Operator’s
Manual and other information provided and use the correct operating
procedure. Machines should be operated only by qualified operators.
• Do not operate this machine or perform maintenance work if you have not had
appropriate training and read and fully understand the instructions and
warnings in this manual.
• Wear the seat belt to maximize the protection capability of a ROPS (Roll Over
Protective Structure) when the machine is so equipped.
• Inspect the ROPS and seat belt mounting bolts on a daily basis to ensure their
integrity.
• Do not permit riders on the machine.
• Make sure that all protective guards, canopies, doors, etc. are in place and
secure.
• Remove all loose object stored in the machine. Remove all objects which do
not belong in or on the machine and its equipment.
To Next Page
Loading...
