Need help?Do you have a question about the Case 120 and is the answer not in the manual?
General| Brand | Case |
|---|---|
| Model | 120 |
| Category | Excavators |
| Language | English |
Details the procedure and timeframe for the authorized dealer's post-delivery inspection of the tractor.
A message welcoming the purchaser and emphasizing the importance of the manual for satisfaction and service life.
Explains where to find the tractor's model and serial numbers for identification and correspondence.
Provides detailed technical specifications for the gasoline engine, including bore, stroke, and horsepower.
Details the cooling system, which uses forced air with baffles around the cylinder and head.
Outlines the tractor's electrical system, including battery, starter-generator, and voltage regulator.
Describes the transmission type and provides speed ranges for forward and reverse operation.
Lists tire sizes, ply, type, and recommended/maximum PSI for front and rear wheels.
Presents a diagram with measurements and lists the overall width and shipping weight of the tractor.
Specifies the recommended octane rating and type of gasoline for the tractor's engine.
Provides recommendations for using a fuel conditioner to prevent gum and varnish issues.
Lists essential safety rules and precautions for operating the tractor to avoid accidents.
Explains the selection of appropriate lubricating oil based on temperature and the procedure for oil changes.
Guides the user through the initial break-in period for a new tractor to ensure proper operation.
Lists essential checks to perform before starting the tractor for the first time or before each operating period.
Explains the function of the starter key and choke lever for starting the engine.
Describes how to use the throttle lever to control engine speed during operation.
Explains how to use the selector lever for choosing speed ranges and direction.
Details the function of the combined clutch and brake pedal for stopping and parking.
Describes the operation of the light switch and the function of the ammeter warning light.
Explains how to use the implement lift lever to raise, lower, and hold attachments.
Details how to engage and disengage the Power Take-Off (PTO) lever.
Provides step-by-step instructions on how to safely start and stop the tractor's engine.
Emphasizes the importance of preventive maintenance for ensuring satisfactory and economical operation.
Explains how to adjust the high speed setting on the carburetor for optimal engine performance.
Details the procedure for adjusting the idle speed and fuel mixture for smooth engine idling.
Provides instructions on removing, cleaning, gapping, and installing the spark plug.
Explains how to clean and reset the breaker points for proper ignition timing.
Guides the user on how to install replacement sealed headlight units.
Offers rules and advice for maintaining the tractor's storage battery, including adding water and cleaning terminals.
Covers adding water, cleaning terminals, and maintaining charge for an idle battery.
Showcases various optional attachments available for the tractor, such as blades, blowers, and carts.
Illustrates more optional attachments like plows, mowers, seeders, and harrows for the tractor.
To Next Page
