Need help?Do you have a question about the Case CX Series and is the answer not in the manual?
General| Brand | Case |
|---|---|
| Model | CX Series |
| Category | Excavators |
| Language | English |
Overview of CX Series components and systems.
Details about the engines used in CX series excavators.
Information on the hydraulic reservoir system.
Details about the filtration system components.
Explanation of the variable volume piston pump system.
Description of pilot operated hand and foot controls.
General overview of the hydraulic system.
Functionality of the boom and arm cylinder cushion system.
Operation and features of the swing system.
Details on the travel system for specific models.
Information on attachment cylinder cushioning features.
Overview of the 24-volt starting and charging system.
Identification of primary components for CX130/CX160 models.
Identification of primary components for CX210/CX240 models.
Lists and locations of electrical parts for CX130/CX160.
Lists and locations of electrical parts for CX210/CX240.
Identifies control valve ports for CX130/CX160.
Pressure settings for CX130/CX160 relief valves.
Identifies pump ports for CX130/CX160.
Identifies control valve ports for CX210/CX240.
Pressure settings for CX210/CX240 relief valves.
Identifies pump ports for CX210/CX240.
Identification and function of six solenoid valves.
Steps for calibrating the machine controller.
Visual guide for navigating diagnostic modes.
Displays current operational parameters.
Displays transistor output status.
Lists fault codes for CX210/CX240 engine.
Records operational hours for various functions.
Procedures for resetting system parameters.
Overview of electrical operations and functions.
Manages engine speed and work modes.
Details the stepper motor for throttle control.
How engine RPM is controlled and adjusted.
Operation of one-touch and auto idle features.
How to select and change work modes.
RPM settings for different work modes.
RPM settings for different work modes.
Overview of electric controls for hydraulic functions.
Control of hydraulic pump output based on mode.
Function and operation of the power boost feature.
Automatic activation of power boost.
Operation of the two-speed travel system.
Control of boom and arm movement cushioning.
Operation of the swing brake system.
Functionality of the swing lock mechanism.
Disables pilot controls when the gate lever is raised.
Overview of hydraulic operations and functions for CX130/CX160.
Details on low speed, high speed, and straight travel.
Covers swing operation, lock, and priority.
Explains boom, arm, and bucket operations.
Details on power boost, main relief, and free swing.
Information on auxiliary hydraulic kits.
Overview of hydraulic operations and functions for CX210/CX240.
Details on low speed, high speed, and straight travel.
Covers swing operation, lock, and priority.
Explains boom, arm, and bucket operations.
Details on auto power boost, main relief, and free swing.
Information on auxiliary hydraulic kits.
Pressure test specifications for CX130.
Pressure test specifications for CX160.
Pressure test specifications for CX210.
Pressure test specifications for CX240.
Details changes in engine components for newer models.
Overview of the ECM, sensors, and inputs/outputs.
Diagram of the electronic fuel system components and flow.
Identifies engine components on the left side.
Identifies engine components on the right side.
Explains how the fuel system operates.
Steps for diagnosing fuel system issues.
Explains the meaning of different fault codes.
Comprehensive list of fault codes and their effects.
To Next Page
