GENERAL INTRODUCTION
1 - 5
CX EXCAVATORS
EXPLANATION OF CX SERIES
Pilot Controls
The attachment controls are pilot operated by hand actuated controllers on all models. The
pilot hand controls are mounted to tilting armrests that can be positioned to provide for
maximum operator comfort. The standard control pattern is the SAE pattern. The controls
can be changed to other configurations by changing the pilot hose connections at the pilot
manifold, located behind the cab (see Section 3 of this manual for instructions). There is a
pattern change kit available as an option. This allows pattern changes without moving hoses.
When the left arm is tilted up or the gate is up, all pilot operated control functions are
inactive.
On all models, the travel system is actuated by foot pedals that also have hand control levers
attached. The travel controls are pilot pressure operated on all models. The CX240 has the
single pedal feature, by actuating a single control pedal, both travel systems will travel at the
same speed and direction. This feature gives the operator straight-line travel in either forward
or reverse.
Pilot Controls
MODEL CX130 CX160 CX210 CX240
Pilot
operated
hand and
foot controls
yes yes yes yes
Single pedal
travel
no no no yes
To Next Page
Loading...
