EasyManua.ls Logo

Case CX60C - User Manual

Case CX60C
320 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Part number 51486170
1
st
edition English
June 2018
Mini Excavator
OPERATOR’S MANUAL
ORIGINAL INSTRUCTIONS
CX60C

Table of Contents

Questions and Answers

  • R
    Robert KeithJul 29, 2025
    Why is steam emitted from the radiator of my Case Excavators and the coolant level warning light is on?
    • R
      Ralph LoganJul 29, 2025
      Steam emission and a coolant level warning light in your Case Excavators can be caused by several issues: * Low coolant level: Replenish the coolant and inspect for any leaks. * Incorrect fan belt tension: Adjust the fan belt tension. * Dirty cooling system: Flush the cooling system. * Dirty or damaged radiator fin: Clean the radiator fin. * Incorrect radiator cap torque: Tighten the radiator cap firmly or replace its packing.
  • C
    Christopher CarrollAug 6, 2025
    What to do if the engine oil pressure indicator light appears on my Case CX60C?
    • R
      rebecca32Aug 6, 2025
      If the engine oil pressure indicator light appears after warming up your Case Excavators, it could be due to: * Low oil level: Add oil to the specified level. * Clogging in the oil filter: Replace the oil filter cartridge. * Oil leaks: Check the correct tightening torque of pipes and joints.
  • W
    wyoungAug 13, 2025
    Why is the exhaust gas white or blue in my Case Excavators?
    • R
      Ryan WilliamsAug 13, 2025
      White or blue exhaust gas in your Case Excavators may be due to: * Wrong oil quantity: Adjust to the specified oil quantity. * Wrong fuel: Replace with the specified fuel.
  • E
    Ethan ChavezAug 20, 2025
    What causes unusual combustion noise or mechanical noise in Case CX60C?
    • J
      joel21Aug 20, 2025
      Unusual combustion or mechanical noise in your Case Excavators can be caused by: * Using the wrong fuel: Check with specified fuel. * Over-heating: Check for over-heating.

Summary

2 SAFETY INFORMATION

Signal Word Definitions

Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE for hazard communication.

General Safety Rules

Provides essential safety guidelines covering operation, maintenance, and hazard avoidance.

Hazardous Chemicals

3 CONTROLS AND INSTRUMENTS

Forward Controls

Details the left and right-hand control levers and their functions in ISO and A type patterns.

Travel and Boom Swing Controls

Operator Interface and Display

Describes right-hand controls, starter, instrument cluster, gauges, warning lights, and menu navigation.

4 OPERATING INSTRUCTIONS

Starting the Machine

Covers anti-theft protection, ESL mode, password change, and the engine starting procedure.

Machine Warm-up Procedure

General Machine Operation

Covers safe operation practices, normal machine function, and working on sloping ground.

Attachment Operations

Travel Precautions

Parking the Machine

Outlines the correct procedure for safely parking the machine on level or sloped ground.

5 TRANSPORT OPERATIONS

Road Transport Procedures

Covers loading, trailer setup, machine setup, and unloading for road transport.

Preparing for Shipping

Unloading from Transport

6 MAINTENANCE

Basic Instructions and Specifications

General guidelines and specifications for performing maintenance tasks on the machine.

Maintenance Planning and Intervals

Presents the maintenance chart detailing service actions based on operating hours.

Key Maintenance Procedures

Details essential maintenance tasks like oil changes, filter replacements, greasing, and belt checks.

System Specific Maintenance

7 TROUBLESHOOTING

Fault Code Resolution

Diagnostic methods for engine, electrical systems, MCU, and other common machine problems.

Engine Troubleshooting

Lists common engine problems, their possible causes, and recommended corrective actions.

Electrical Systems Troubleshooting

Diagnoses issues related to the instrument cluster, alternator, starter motor, and wiring.

Machine Control Unit (MCU) Troubleshooting

8 SPECIFICATIONS

Machine Specifications

Provides detailed technical specifications for the engine, pumps, motors, cylinders, and valve systems.

Dimensions and Working Range

Case CX60C Specifications

General IconGeneral
BrandCase
ModelCX60C
CategoryExcavators
LanguageEnglish

Related product manuals