CONTROLLER
3 - 36
CX EXCAVATORS
MACHINE HISTORY
HR1
ENG: Hour Meter, hours (engine running) since last cleared
WRK: Operating hours (pressure switch “ON”)
U: Upper operating hours
T: Travel operating hours
S: Swing operating hours
PU: Power Boost operating hours
BRK: Hammer operating hour
Use the Buzzer stop switch to scroll through the HR screens.
Note: To erase work history data from the HR1 screen press and hold the
Work mode switch for 10 seconds (buzzer will sound). Turn OFF key.
HR MODE Hi, H
1 T 0 0 0 0 HR
ENG 0 0 0 0 HR S 0 0 0 0 HR
WRK 0 0 0 0 HR PU 0 0 0 0 HR
U 0 0 0 0 HR BRK 0 0 0 0 HR
To Next Page
Loading...
