CONTROLLER
3 - 48
CX EXCAVATORS
RESETTING
RST1
BRK: Programmed RPM for Hammer mode
L/M: Not Used
AI: Auto-Idle setting time (1 to 30 seconds)
PA: Altitude compensation (0=off, 1=on)
AU: Auto Power Boost Cancellation (0=off, 1=on)
HLD: Hold previous (default) data (0=with, 1=without)
OUT: Not Used
Use the Buzzer stop switch to scroll through Resetting.
RST MODE Hi, H
1 PA 0 0 0 0
BRK 0 0 0 0 RPM AU 0 0 0 0
L/M Not Used RPM HLD 0 0 0 0
AI 0 0 0 0 SEC OUT Not Used
To Next Page
Loading...
