1001-3
Cre 7-56942GB Issued 11-99
SAFETY
To avoid all risks, always follow the safety notes con-
tained in this section and throughout this manual.
Put the warning tag shown below on the key for the
keyswitch when servicing or repairing the machine.
One warning tag is supplied with each machine.
Additional tags, Part Number 321-4614, are available
from your service parts supplier.
PDG0328
WARNING:
This symbol means WARNING ! BE VIGILANT ! YOUR SAFETY IS AT RISK. The message
that follows the symbol contains important safety information. Read it carefully. Be sure you understand
the possible risks of injury or even death.
!
WARNING:
Read the Operator’s Manual
carefully and make sure you understand how
to operate the controls correctly.
WARNING:
Never operate the machine and
attachment controls unless you are seated in
the operator’s seat. If you are not in the
operator’s seat, you run the risk of serious
injury.
WARNING:
The machine is built to carry the
operator only. Do not allow passengers to
ride on the machine.
!
!
!
WARNING :
Prior to starting up the engine
read the safety messages contained in the
operator’s manual carefully. Read all safety
stickers on the machine. Have people move
back from the machine. Learn how to use the
controls before starting up the machine. It is
your responsibility to follow the manufacturer’s
instructions on how to operate and maintain
the machine. It is your responsibility to follow
applicable rules and regulations. Service and
Operator’s Manuals are available from your
J.I. Case Dealer.
WARNING:
If you wear loose clothing or if
you omit to use safety equipment for your
work, you risk injury. Always wear clothes
that do not risk getting caught in the
machine. Other safety equipment may be
necessary, in particular : helmets, safety
shoes, ear plugs, safety glasses, protection
mask, thick gloves and reflecting clothes.
WARNING:
When working close to the fan
with the engine running, avoid wearing loose
clothing and operate with extreme caution.
WARNING:
When checking the hydraulic cir-
cuits, follow procedures to the letter. DO
NOT CHANGE procedures.
!
!
!
!
https://truckmanualshub.com/
To Next Page
Need help?
General
