SAFETY/DECALS/HAND SIGNALS
19
Maintenance Precautions
• Do not attempt repairs unless trained. Refer to manuals and experienced repair
personnel for help.
• Before you service the machine, put a Do Not Operate tag on the key switch.
The Do Not Operate tag is included with your new machine. Addition tags, part
number 321-4614 are available from your Case dealer.
BD05C034 / 321-4614
• Wear protective glasses and other required safety equipment when servicing or
repairing the machine.
• Wear gloves to protect hands when handling cable.
• Disconnect the battery before working on the electrical system. Know the
consequences of disconnecting any electronic or computer devices.
• Avoid lubrication or mechanical adjustments with the machine in motion or the
engine operating. If the engine must be in operation to make certain
adjustments, place the transmission in neutral, apply the parking device, place
the equipment in a safe position, securely block the wheels and use extreme
caution.
• Securely block the machine or any component that may fall before working on
the machine or component. If possible, use a back up or secondary blocking
device, also.
• To prevent unexpected movement, securely block working elements when
repairing or changing working tool parts such as cutting edges.
• Never make repairs on pressurized components, fluid, gas or mechanical until
the pressure has been relieved according to the manufacturer’s instructions.
• Use extreme caution when removing radiator caps, drain plugs, grease fittings
or pressure taps. Park the machine and let it cool down before opening a
pressurized tank.
To Next Page
Loading...
