Case 580ST - Loader Bucket - Installation

6-WORKINGOPERATIONS
Loaderbucket-Installation
Makesureallbushingsarecompletelyclean.Remove
anydirtorforeignmatter,ifnecessary.
Starttheengine.
Usetheattachmentcontrolstoengagetheattachment
betweenthebucketlugs.
Reinstallthearm/bucketpins(1)andtheninstalltherele-
vantretainingpinsandrings.
Usethebucketcontrolstoaligntheconnectingrodholes
(3)withthebucketlugs.
Stoptheengineandremovethestarterswitchkey.
(4x1bucket)Releasethepressurefromthebucketcircuit.
Installtherod/bucketpins(2)andtheninstalltherelevant
retainingpinsandrings.
(4x1bucket)Removetheplugsandreconnectthehy-
drauliclines.
LEEN11T0166AA1
6-15