1002-3
ENGINE OIL RECOMMENDATIONS
Engine Oil Selection
Case No. 1 Engine oil is recommended for use in your Case engine. Case engine oil will lubricate your engine
correctly under all operating conditions.
If Case No. 1 Multi-Viscosity or Single Grade Engine
Oil is not available, use only oil meeting API engine
oil service category CE.
292L91
See the chart below for recommended viscosity at ambient air temperature ranges.
NOTE: Do not put performance additives or other oil additive products in the engine crankcase. The oil
change intervals given in this manual are according to tests with Case lubricants.
Bur 7-12131
-40°
Oil Viscosity/ Temperature Ranges
Temperature Fahrenheit
-20° 20° 40° 60° 80° 100°
-30° 30° 50° 70°
90°
Temperature Celsius
120°
110°
- NOTE: Use of an engine oil pan heater or an engine coolant
heater is required when operating temperatures are in the
shaded area.
Issued 4-00
Printed in U.S.A.
To Next Page
Loading...
