1001-3
TORQUE SPECIFICATIONS - METRIC HARDWARE
Use the following torques when specifications are
not given.
These values apply to fasteners with coarse
threads as received from supplier, plated or
unplated, or when lubricated with engine oil. These
values do not apply if graphite or Molydisulfide
grease or oil is used.
Grade 8.8 Bolts, Nuts, and Studs
Rae 8-71601
Grade 10.9 Bolts, Nuts, and Studs
Grade 12.9 Bolts, Nuts, and Studs
Usually the torque values specified for grade 10.9
fasteners can be used satisfactorily on grade 12.9
fasteners.
Issued 11-91 Printed in U.S.A
Find manuals at https://best-manuals.com
To Next Page
Loading...
Need help?
General
