1001-2
TABLE OF CONTENTS
TORQUE SPECIFICATIONS - DECIMAL HARDWARE ...................................................................................... 2
TORQUE SPECIFICATIONS - METRIC HARDWARE ........................................................................................ 3
TORQUE SPECIFICATIONS - STEEL HYDRAULIC FITTINGS ......................................................................... 4
TORQUE SPECIFICATIONS - STEEL HYDRAULIC FITTINGS ......................................................................... 5
TORQUE SPECIFICATIONS - DECIMAL HARDWARE
Use the torques in this chart when special torques
are not given. These torques apply to fasteners
with both UNC and UNF threads as received from
suppliers dry, or when lubricated with engine oil.
Not applicable if special graphities, Molydisulfide
greases, or other extreme pressure lubricants are
used.
Grade 5 Bolts, Nuts, and Studs
Rae 8-71601
Grade 8 Bolts, Nuts, and Studs
0
Issued 11-91
Retyped November,
Printed in U.S.A
Find manuals at https://best-manuals.com
To Next Page
Loading...
Need help?
General
