2000-9
Bur 5-5410 Issued 2-07 Printed in U.S.A.
STEP 42
BD07B222
Disconnect air filter restriction indicator switch.
STEP 43
BD07B223
If equipped with air conditioning, disconnect air
conditioning trinary switch, remove hose mounting
clamp and move hose to engine side of fire wall.
Disconnect the hose from the receiver dryer and
move the hose to the engine side of the fire wall.
STEP 44
BD07B224
Remove wiring harness mounting clamp bolts.
Disconnect the ether hose and move the hose to the
engine side of the fire wall.
STEP 45
BD07B225
If equipped with ether, disconnect the ether solenoid
connector. Remove mounting bolt for fuel cap chain,
remove mounting bolt for engine oil dipstick.
STEP 46
Attach lifting equipment to the fire wall and muffler
mounting frame.
STEP 47
BD07B233
Remove the mounting bolts from the fire wall and
muffler to hydraulic reservoir brackets.
STEP 48
Carefully raise and remove fire wall and muffler from
loader. Lower fire wall and muffler onto suitable
platform and disconnect lifting equipment.
To Next Page
Loading...
