Need help?Do you have a question about the Case 821E and is the answer not in the manual?
Provides standard torque values for fasteners when specific values are not provided.
Details fluid and lubricant recommendations for the machine's various systems.
Lists conversion factors between metric and US customary units.
Torque values for decimal-sized bolts, nuts, and studs (Grade 5 and Grade 8).
Torque values for metric-sized bolts, nuts, and studs (Grade 8.8, 10.9, 12.9).
Torque values for various steel hydraulic fittings, including flare and O-ring types.
Details the capacities and recommended lubricants for engine, transmission, axles, and brake systems.
Provides recommendations for engine oil viscosity based on temperature.
Chart showing recommended transmission fluid based on operating temperature.
Information on diesel fuel usage, storage, and specifications for acceptable fuel.
Key maintenance tasks for the initial 100 operating hours of the machine.
Tasks for every 10, 50, and 100 operating hours.
Tasks for every 250, 500, and 1000 operating hours.
Tasks for every 2000 and 6000 operating hours.
Provides conversion factors from metric units to U.S. customary units.
Provides conversion factors from U.S. customary units to metric units.
Step-by-step instructions for safely removing the engine and radiator from the machine.
Step-by-step instructions for safely installing the engine and radiator onto the machine.
General| Brand | Case |
|---|---|
| Model | 821E |
| Category | Compact Loader |
| Language | English |
To Next Page
