To Next PageTo Next Page
Need help?Do you have a question about the Case C80 and is the answer not in the manual?
General| Fuel Type | Diesel |
|---|---|
| Horsepower | 80 hp |
| Drive | 4WD |
| Transmission | 12F/12R |
| PTO Speed | 540/1000 rpm |
General safety warnings, operating precautions, and safety tag usage for tractor operation and maintenance.
Guidelines for cleaning, inspection, and maintenance of parts, including bearings, gears, seals, shafts, service parts, and lubrication.
Torque specifications for various bolt sizes and types (8.8, 10.9) in ft-lb and Nm for different coatings.
Technical data including capacities, steering, transmission, rear axle, differential, and PTO specifications for tractors.
Detailed specifications for hydraulic pumps, valves, springs, and fluid types used in the tractor systems.
Torque values for specific components in steering, transmission, and hydraulic systems, including bolts and nuts.
Tools required for engine maintenance, including gauges, seal installers, and alignment tools with part numbers.
Tools for clutch alignment, tractor splitting, seal installation, and synchronizer gauges for transmission work.
Tools for hydraulic system testing and repair, including flowmeters, test kits, and specialized wrenches for valves.
Steps for preparing the tractor and disconnecting components before engine removal for C50/C60 and C70/C80/C90/C100 models.
Steps for installing the engine, securing it, and connecting components, including torque specifications and lubrication.
Procedures for filling the cooling system after engine installation, including bleeding air and checking coolant levels.
