SECTION 00 - INTRODUCTION 1
1. SAFETY INSTRUCTIONS
Carefully read the safety rules contained herein and
follow advised precautions to avoid potential haz-
ards and to safeguard your safety and personal in-
tegrity.
In this manual you will find the following indications:
SWARNING
This symbol warns about the possibility of potential
damages to the machine that can involve the opera-
tor’s safety.
SDANGER
With specific warnings about potential dangers for
the operator’s or other persons integrity directly or
indirectly involved.
The non compliance with the warning preceded by
the above mentioned key-words (WARNING and
DANGER) can cause serious accidents or even the
death of the persons involved.
Moreover in the present Manual have been given
some instructions with texts in italics, preceded by
the words NOTE and CAUTION, with following
meanings for machine protection:
NOTES: it emphasizes and underlines to the opera-
tor the correct technique or correct procedure to fol-
low.
SWARNING
It warns the operator of a possible hazard of machine
damage in case he does not follow a determined pro-
cedure.
Your safety and that of people around you depends
on you. It is essential that you understand this man-
ual for the correct operation, inspection, lubrication
and maintenance of this machine.
Find manuals at https://best-manuals.com
To Next Page
Loading...
