Case 2050M Tier 4A interim User Manual

Part number 47907871
2
nd
edition English
October 2015
Replaces part number 47645618
SERVICE MANUAL
2050M
Tier 4A (interim)
Crawler Dozer
PIN NCDC25000 and above; PIN NDDC25000 and above
PIN NEDC20000 and above; PIN NFDC20000 and above
Printedin U.S.A.
© 2015 CNH Industrial America LLC. All Rights Reserved.
Case is a trademark registered in the United States and many
other countries, owned by or licensed to CNH Industrial N.V.,
its subsidiaries or affiliates.

Case 2050M Tier 4A interim Specifications

General

Brand	Case
Model	2050M Tier 4A interim
Category	Construction Equipment
Language	English

Summary

Foreword - Equipment Servicing Notice

Safety Rules

Personal Safety

Instructions and precautions for operator safety and preventing personal injury.

General Maintenance Safety

Guidelines for safe machine servicing to prevent accidents and damage.

Fire, Explosion, and Battery Safety

Measures to prevent fires, explosions, and hazards associated with batteries.

Operator and Machine Protection Safety

Safety regarding ROPS, operator systems, and warning tags.

Torque Specifications

Minimum Tightening Torques

Tightening torque values for decimal and metric hardware.

Hydraulic Fitting Torque Data

Standard torque data for hydraulic tubes and fittings.

Special Torque Applications

Specific torque values for components like rippers, pumps, and final drives.

Maintenance and Operation Procedures

Maintenance Chart

Scheduled maintenance actions for various machine systems and components.

Moving a Disabled Machine

Procedures for towing, including electronic override and brake release.

Hydraulic Contamination

Understanding and addressing microscopic and visible contamination in hydraulic oil.

Technical Data and Identification

Consumables - Loctite Product Chart

Details on Loctite adhesives, retaining, and sealing products.

Capacities and Lubricant Specifications

Fluid capacities and recommended lubricants for machine systems.

Product Identification Information

Machine serial numbers, ROPS plates, and orientation terms.