Need help?Do you have a question about the Case 821F Tier 4 and is the answer not in the manual?
General| Brand | Case |
|---|---|
| Model | 821F Tier 4 |
| Category | Construction Equipment |
| Language | English |
Torque values for Grade 5 and Grade 8 decimal hardware fasteners.
Torque values for Grade 8.8, 10.9, and 12.9 metric hardware fasteners.
Torque specifications for various steel hydraulic fittings, including flare and O-ring types.
Fluid capacities and recommended lubricants for the 821F model.
Fluid capacities and recommended lubricants for the 921F model.
Guidelines for selecting engine oil based on viscosity and ambient temperature.
Chart indicating transmission oil temperature ranges for different operating conditions.
Requirements and specifications for diesel fuel, including storage and quality.
Information on SCR system operation, DEF fluid, storage, handling, and shelf life.
Comprehensive table detailing required maintenance tasks and their service intervals.
Visual diagram illustrating the locations of maintenance points on the machine.
Step-by-step guide for safely removing the engine from the machine.
Step-by-step guide for correctly installing the engine into the machine.
Step-by-step guide for safely removing the radiator from the machine.
Step-by-step guide for correctly installing the radiator into the machine.
Key operational specifications for the 821F model relevant to stall testing.
Key operational specifications for the 921F model relevant to stall testing.
Detailed instructions for conducting torque converter and hydraulic stall tests.
Explanation of instrument cluster screens for monitoring test parameters.
To Next Page
